How do you binary search for two people arriving, one punches the other, they both leave?
In the same way the OP talks about it …
You don’t watch the whole thing, he said. You use a binary search. You fast forward to halfway, see if the bike is there and, if it is, zoom to three quarters of the way through. But if it wasn’t there at the halfway mark, you rewind to a quarter of the way though. Its very quick. In fact, he had pointed out, if the CCTV footage stretched back to the dawn of humanity it would probably have taken an hour to find the moment of theft.
Instead of a bike, you look for the aftereffects of a fight happening (chairs knocked down, tables turned over, etc.). You can even look at how many people congregate around the location of the fight before and after the video as a ‘marker’ to the point of time the fight was happening/just finished.
Edit: One thing we didn’t even mention, AI can also be used these days to notice subtle changes in the video. If a video is a static image of an alley, then two people walk in the alley and fight, even though they leave no traces behind, that moment of the fight is caught on the video with activity/movement. Motion sensor movement, basically.
And you are seriously trying to kill the messenger.
OP specifically said that you’re fucked if there is no visual cue.
And I’m saying there’s ALWAYS a visual clue/cue, always. Either the bike is there one minute and gone another, or a fight breaks out and trashes the place from the fight. In the vast amount of cases, there’s always a visual difference.
And in this case we’re talking specifically about a bike, going missing.
Absolutely not true. Guy walks bye and shoots someone well offscreen. Momentary action with no visual cue before or after. Why are you arguing this useless point?
Absolutely not true. Guy walks bye and shoots someone well offscreen. Momentary action with no visual cue before or after. Why are you arguing this useless point?
The person dropping to the ground dead would be the visual cue.
Ok but the text that you replied to, that you quoted, was “If the event lasts only a moment and leaves no visual cue (e.g. an assault), then binary search is practically useless.” Emphasis mine. If you’d started out saying “there’s ALWAYS a visual cue,” then you likely wouldn’t be getting dragged, but you started out arguing from this position without clarifying it, which makes it seem like you didn’t know what you were talking about. You can’t say that you can simply look for visual cues when the other person specified that there were none.
Ok but the text that you replied to, that you quoted, was “If the event lasts only a moment and leaves no visual cue (e.g. an assault), then binary search is practically useless.” Emphasis mine. If you’d started out saying “there’s ALWAYS a visual cue,” then you likely wouldn’t be getting dragged, but you started out arguing from this position without clarifying it, which makes it seem like you didn’t know what you were talking about.
Last time I checked, I’m allow to disagree with a comment someone made, and argue the opposite. Just because they say ‘no visual cue’ does not mean that is no visual cue.
You can’t say that you can simply look for visual cues when the other person specified that there were none.
Why, because you say so? Yes, I can. Of course I can.
Its called “disagreeing” with what the other person is speaking of, and countering. Its a discussion.
Just because they say ‘no visual cue’ does not mean that is no visual cue.
It literally, explicitly does, because they are talking about a hypothetical situation where no visual cues are left. If no visual cues are left, then there are no visual cues to see.
Why, because you say so? Yes, I can. Of course I can.
Okay. I should have been extremely specific. You cannot rightly and correctly say that there are visual cues that could be found when the other person explicitly says that there are no visual cues to be found, because in the hypothetical situation that they’ve brought up, there would be no visual cues to find, and so while you are physically capable of stating the phrase “just look for the visual cues,” or some variation thereof, you are incorrect in the assumption that there would be visual cues to find.
When somebody says “you can’t say” followed by a statement that’s incorrect, they aren’t trying to tell you that you are physically incapable of saying that statement; rather, there is an implicit “correctly” or “honestly” between the “can’t” and “say.”
You seem to talk about different things when you say “visual clue”. Yes, there will be a small duration in the video where the event happens and maybe a short aftermath. That’s not a visual clue, that’s the thing you’re looking for. What all others mean by visual clue is a definite indicator that you can see when picking any random frame in the video that tells you if that frame is before or after the event. That allows you to exclude all other frames from your search, reducing your search range by half.
A stolen bike, a broken window, your examples that trash the place or end up with a crowd of people in the area, all leave such a visual clue. At any random frame you can check if the bike is there or not, the window is broken or not, etc.
But let’s say you have footage of the street facing CCTV and you need to find at what time the suspect left the scene (crime happened somewhere else). There’s nothing that tells you when looking at the halfway point if the suspect already passed or didn’t. You still have to look at both sides of that point in time.
The classic example for binary search is looking for a word in a dictionary. You open it halfway and see if the words there are before or after the one you’re looking for. Then you know which half of the dictionary you need to look in next. Then you use the same method for that half and so on.
But what if someone highlighted a word in the dictionary and you don’t know which word? Binary search is useless. You have to skim through the whole thing until you see it.
You didn’t get what was talked about here. Re-read the topmost parent comment.
How do you binary search for two people arriving, one punches the other, they both leave?
In the same way the OP talks about it …
Instead of a bike, you look for the aftereffects of a fight happening (chairs knocked down, tables turned over, etc.). You can even look at how many people congregate around the location of the fight before and after the video as a ‘marker’ to the point of time the fight was happening/just finished.
Edit: One thing we didn’t even mention, AI can also be used these days to notice subtle changes in the video. If a video is a static image of an alley, then two people walk in the alley and fight, even though they leave no traces behind, that moment of the fight is caught on the video with activity/movement. Motion sensor movement, basically.
You are seriously confused. OP specifically said that you’re fucked if there is no visual cue.
And you are seriously trying to kill the messenger.
And I’m saying there’s ALWAYS a visual clue/cue, always. Either the bike is there one minute and gone another, or a fight breaks out and trashes the place from the fight. In the vast amount of cases, there’s always a visual difference.
And in this case we’re talking specifically about a bike, going missing.
Absolutely not true. Guy walks bye and shoots someone well offscreen. Momentary action with no visual cue before or after. Why are you arguing this useless point?
The person dropping to the ground dead would be the visual cue.
…well offscreen… wow
If its all offscreen, then WTF are we bothing to talk about?
Is this on purpose?
The shooter is on screen the victim is not.
This is on purpose isn’t it. You’re fucking with me.
Ok but the text that you replied to, that you quoted, was “If the event lasts only a moment and leaves no visual cue (e.g. an assault), then binary search is practically useless.” Emphasis mine. If you’d started out saying “there’s ALWAYS a visual cue,” then you likely wouldn’t be getting dragged, but you started out arguing from this position without clarifying it, which makes it seem like you didn’t know what you were talking about. You can’t say that you can simply look for visual cues when the other person specified that there were none.
Last time I checked, I’m allow to disagree with a comment someone made, and argue the opposite. Just because they say ‘no visual cue’ does not mean that is no visual cue.
Why, because you say so? Yes, I can. Of course I can.
Its called “disagreeing” with what the other person is speaking of, and countering. Its a discussion.
It literally, explicitly does, because they are talking about a hypothetical situation where no visual cues are left. If no visual cues are left, then there are no visual cues to see.
Okay. I should have been extremely specific. You cannot rightly and correctly say that there are visual cues that could be found when the other person explicitly says that there are no visual cues to be found, because in the hypothetical situation that they’ve brought up, there would be no visual cues to find, and so while you are physically capable of stating the phrase “just look for the visual cues,” or some variation thereof, you are incorrect in the assumption that there would be visual cues to find.
When somebody says “you can’t say” followed by a statement that’s incorrect, they aren’t trying to tell you that you are physically incapable of saying that statement; rather, there is an implicit “correctly” or “honestly” between the “can’t” and “say.”
No, I am not. I’m disagreeing with that, and my comments are stating as much. I’m allowed to disagree with what someone is saying.
You seem to talk about different things when you say “visual clue”. Yes, there will be a small duration in the video where the event happens and maybe a short aftermath. That’s not a visual clue, that’s the thing you’re looking for. What all others mean by visual clue is a definite indicator that you can see when picking any random frame in the video that tells you if that frame is before or after the event. That allows you to exclude all other frames from your search, reducing your search range by half.
A stolen bike, a broken window, your examples that trash the place or end up with a crowd of people in the area, all leave such a visual clue. At any random frame you can check if the bike is there or not, the window is broken or not, etc.
But let’s say you have footage of the street facing CCTV and you need to find at what time the suspect left the scene (crime happened somewhere else). There’s nothing that tells you when looking at the halfway point if the suspect already passed or didn’t. You still have to look at both sides of that point in time.
The classic example for binary search is looking for a word in a dictionary. You open it halfway and see if the words there are before or after the one you’re looking for. Then you know which half of the dictionary you need to look in next. Then you use the same method for that half and so on.
But what if someone highlighted a word in the dictionary and you don’t know which word? Binary search is useless. You have to skim through the whole thing until you see it.